wing rigger

6 04, 2016

Wing Rigger set screw adjustment in the mounting block

By CEI|2017-02-09T20:44:35+00:00April 6th, 2016|Categories: Racing Shells & Kayaks|Tags: maintenance, rigging, wing rigger|0 Comments

When you see that the mounting bar from your wing rigger has worn a groove in the mounting blocks you know that the adjustment of the set screw is past due:

Mounting bar from your wing rigger has worn a groove in the mounting blocks

The conical point of the set screw fits in a matching hole in the end of the mounting bar and should be adjusted so the mounting bar never touches the block. If the set screw is not in far enough it no longer locks the mounting bar in position and the rigger can move from side to side and up and down making balance and power transfer less accurate. PS – you might want to get your hearing checked; because, there is often a creaking noise every stroke.

Proper adjustment keeps the mounting bar 1/2 mm (.02″) above the block and the screw should be adjusted so that the mounting bar is about 1/2 to 1 mm away from the vertical face of the mounting block.

Proper adjustment of set screw

Why We Pioneered Wing Riggers

By CEI|2016-03-08T00:07:36+00:00March 7th, 2016|Categories: Composite Manufacturing, Racing Shells & Kayaks|Tags: weight, wing rigger|0 Comments

We pioneered the wing rigger concept in 1984 when the minimum shell weight rule was imposed. We had to increase the weight of our boats by 20% and searched for a way to make out boats heavier without being slower. The airfoil rigger more than compensated for the additional drag of the heavier boat and still allowed us to add more carbon fiber to the hull and make out boats the stiffest ones available. Now that we are all competing with a minimum boat weight the improved aerodynamics give our boats a 3 second advantage over 2000 meters.

Our wing riggers are interchangeable between every wing rigger boat we have ever made. The wonderful thing is that the rower’s rigging dimensions are preserved even when putting a rigger from their single on a double, pair, or the eight we made for the 1988 Olympics. This saves a lot of time and worry, gives rowers trying different boats a better experience, and better utilizes the fleet of boats in the club.

Attaching Wing Rigger

By CEI|2017-02-09T20:44:35+00:00October 27th, 2015|Categories: Racing Shells & Kayaks|Tags: rigging, wing rigger|0 Comments

Did you know…it’s so easy to attach the wing rigger to a Van Dusen Advantage? Simply set the wing rigger’s mounting bars into place between the boat’s mounting blocks, check that the footboard heel bar is securely in one of the stretcher fitting slots, tighten the thumb screws, and you’re ready to go. You don’t even need tools! With this innovative concept, you can transfer your wing riggers between boats or seats while keeping your personal rigging specifications intact–including your foot position and footboard angle. And the simplicity of removing the wings makes it easy to store two boats to a rack. Great for clubs looking to more efficiently utilize their rack space. The Van Dusen wing riggers are one of Van Dusen’s many “Advantages”!

About CEI

Van Dusen Racing Boats

About Custom Spars